PE-51 is used on an as-need basis. 

We just recommend using PE-51 when you start to smell urine odors. If you have children on your turf, we recommend using PE-51 more often to get rid of any bacteria in your grass.

 Seasonal changes may require application more often. ie. Summer and dry spells. 

1. Pre-soak turf surface lightly with water prior to product application. 
2. Shake the 32 oz bottle prior to application. 
3. Attach water hose to max flow nozzle, ensuring black gasket is on the inside of the max flow nozzle.
4. Tighten bottle to nozzle clockwise; do not over tighten.
5. Turn water source on.
6. While holding the hose and nozzle end away from you, turn the safety tab back towards you.
7. Point the nozzle at the soiled areas and spray using a sweeping motion.
8. The nozzle dilutes the PE-51 concentrate product to 2 oz. / gallon of water.
9. When finished, turn the safety tab back to the upright position, turn water hose off at the source, and disconnect from max flow nozzle.
10. Turn the hose on without the nozzle. Lightly spray the turf keeping the turf wet for a long as you can. The longer the turf is wet the better for enzymes continue to be activated, killing bad bacteria.

ZeoFill Infill is an almond colored premium clinoptilolite zeolite which does not have calcium or quartz, which other zeolites contain. 

Generic zeolites are gray ,green or pure white. Gray zeolite will change to a light green but has impurities that could cause issues. Most white zeolites in North America also have calcium, which break down after a good hard rain and will cause discoloring turf fibers or stamped colored concrete. 

Not all zeolites are the same. Every zeolite mine has different particles embedded in the pit, then crushed and put into its bag.

Zeolite pet odor infill is recommended on top of turf, working down into the thatch with a brush broom. See chart for recommended usage.

The benefits of using small amounts of pet odor infill under the turf during installation will prevent the forced bacteria trapped during hard rains from turning into ammonia.

Many of the potentially harmful elements and odors found in recycled crumb rubber or plastics can be mitigated with our mineral. 

ZeoFill Infill has been shown to absorb many types of liquids, gasses and particulates; including ammonia, heavy metals, toxins, carcinogens and volatile organic compounds. Zeofill Zeolite attracts substances such as ammonia and breaks them down naturally. It has a negatively-charged honey-combed molecular structure that absorbs liquid like a magnet. It also prevents ammonia from forming into a gas, thus getting rid of that foul smell.

ZeoFill Infill also absorbs moisture. It helps prevent mold, mildew and decomposition that often occur in organic infills such as wood chips, cork, coco coir or walnut.